PMP series Plate Magnet
The range supplied with ferrite or series B C and the very latest series D rare earth elements. The all stainless steel units available with tapered steps supplied loose or attached to the magnet surface.
PMG series Grate Magnet photo
Of all stainless steel construction, the 25 mm dia tube assembly is supplied with ferrite or the series B C and the very latest series D rare earth elements in a variety of shapes and sizes such as:- square, rectangular, round, with or without frame and made to measure.
PHG series Tube Magnet
Of all stainless steel construction, the 25 or 30 mm dia tube assembly is supplied complete with the series B C or the very latest series D rare earth elements.
PMC series Cascade Magnet
Suitable for the gravity feed of medium to high density products, and available with 45°, 60° or 75° change of direction. All units fitted with a hinged PMP series plate magnets.
PCM series Cone Magnet
The cone magnet is designed to fit into low pressure pipe lines varying in size from 50 to 500 mm dia.; and handle dry free flowing products.
PWM series Wedge Magnet
Suitable for the gravity feed of products with poor flow characteristics. The Wedge Magnet is available in two sizes. The PWM 200 and PWM 250
Both models are fitted with PMP series plate magnet c/w ferrite or rare earth elements, plus optional steps & catch tray to whatever width is required. Enclosures for elevated pressures are also available.
RPS series Round Pipe Separator
Suitable for the gravity feed of low to medium density products.All models of stainless steel totally sealed construction and fitted with PMP series plate magnet magnet c/w ferrite or rare earth elements, plus optional steps. Enclosures for elevated pressures are also available.
PMF series Filter photo
All filters c/w ferrite or rare earth elements designed to handle variety of liquids including highly viscous products. Water-jacketed model also available for all sizes
PMPY series Pulley
A range of conveyer head pulleys from 150 to 750 dia mm fitted with ferrite elements. All sizes c/w shafts & keyways, lagged / crowned surface, as required. Pulleys with electro elements are also available.
PMD series Drum with or without Housing photo
All models designed to handle dry free flowing products, either gravity or controlled feed; and available with ferrite or rare earth elements, dust tight stainless steel housing, ARS wear wraps, axial, crossed, radial or salient field, variable speed drum control. PMD c/w rare earth element 300 or 350 dia only
Suspended Magnet photo
A range of magnets with or without a self-cleaning facility is available for mounting over conveyer belts. The magnets are c/w ferrite or electro elements, with selection dependent upon the application requirements
HIMS series High Intensity Magnetic Separator
A range of Roll and Drum magnets designed to remove weakly magnetic particles from dry free flowing products.
EMF series Electro Filter
All filters c/w electro magnetic elements designed to handle variety of liquids including highly viscous products. The models have a background field strength from 1,500 to 5,000 gauss, with capacities ranging from 50 to 250 litres / min.
PMR series Magna Bar & Barrel
Both items designed to fit beneath conveyor belts and retain ferrous items in a fixed position during there transportation.
MR series Eddy Current Separator
A range of models from 300 mm to 1500 mm wide all designed to handle domestic and industrial waste products. The magnetic rotor available with ferrite or rare earth elements.
PMW Permanent Magnetic Wheel Separator
A range of models c/w rare earth elements, mag. and non- mag. retreat chute assembly.
Open field 5,000 gauss and with matrix installed variable around 15,000 gauss.